Tired of Skyrocketing Heating Costs?

What is the impact on total wood consumption per year if you use a super efficient furnace like our Kuuma Vapor-Fire?

Here are the important numbers that need to be examined: 1 gal. #2 fuel oil = 140,000 BTUs; 1 gal. propane - 91,500 BTU's; 1 cord paper birch wood = 21 M BTU's; 1 cord red oak = 25 M BTU's.
KuumaVapor-Fire furnaces were tested to have an overall efficiency as high as 85%, 99.4% combustion efficiency, less than 1 gr/hr of emissions, 99% "Smokeless" burn cycles, internal flue temperatures 285-400 degrees F., and external flue temperatures 150-250 degrees F. Kuuma Vapor-Fire furnaces have been used for over 25 years with no condensation issues whatsoever, because the flue temperatures are still high enough to support a natural draft system when installed according to our written directions.
A good estimate for oil usage for a heating season would be 500-1,000 gal., with lots of variables. We'll take a look at an average home using 750 gal. of oil for the heating season. 750 gal = 105 M BTU's. If a wood furnace was 100% overall efficient, which is not possible, it would take : 105 M BTU's /21M=5 cords of birch or 105 BTU's/25M=4.2 cords of oak.
Our KuumaVapor-Fire furnace at 82% average overall efficiency would be; 105 M BTU's/(21Mx82%) = 6.09 cords of birch or 105 M BTU's/(25 M x 82%) = 5.12 cords of oak.
Most manufacturers struggle to hit 60% overall efficiency, but we'll look at their results based on 60%. 105 M BTU's/(21M x 60%) = 8.33 cords of birch or 105 M BTU's/ (25M x 60%) = 7 cords of oak.
Therefore, using our efficient Vapor-Fire furnaces will, without a doubt, use less wood to deliver the same amount of BTU's you'd require in oil or propane for the heating season then a less efficient furnace would. The other big advantages are minimal air pollution, longer more even burns, and minimal creosote accumulation from 99% "Smokeless" burn cycles. The safely aspect is also huge in saving homes and lives.
I'm quite sure alot of manufacturers will be very surprised to see their furnace test results when regulations come into effect in 2013-14. They're not going to believe how much air pollution and wasted wood their so called efficient furnaces have produced. Many manufacturers will have to fold or redesign their furnaces quickly. I'm thankful that I invested the time, effort and money in preliminary testing so that our company is prepared for the future. We knew the regulations were forthcoming.

Heating Season

Ready to ship out 3 more Kuuma Vapor-Fire 100 Wood Gasification Furnaces.  With heating season fast approaching it's never to early to get prepared. 

We designed both the Kuuma Vapor-Fire 100 and Kuuma Vapor-Fire 200 furnaces to eliminate wood smoke. This gets rid of the creosote and air pollution at the same time. If there ever was a GREEN product, the VaporFires are that. They make wood burning safe and more environmentally and operator friendly. They burn wood up to 99% of each burn, "Smokeless". Less than 1 gram per hour of emissions are produced to enhance and not harm our environment. The burn is controlled automatically by simply turning the knob on its unique 24 volt computer for the level of burn you desire. This eliminates the guess work involved in safely and cleanly burning wood. The 24 volt computer does it automatically for you, start to finish.